Getting used to the different modes is an essential part of learning JUNOS –
I have learned the different Juniper JUNOS modes and they are included in this post.
Root Login Prompt: lab-mx-1 (ttyu0) login: Shell Prompt: root@lab-mx-1% Enter the CLI (Command Line Interface): root@lab-mx-1% cli Operation mode within the CLI: root@lab-mx-1> Enter the Configuration mode: root@lab-mx-1> configure Configuration mode: root@lab-mx-1#
There are different types of configuration modes, that I have found very useful.
[…] In order to get the node working properly after removing it from the cluster, I had to issue three commands. Again making sure that I am in configure mode. […]